|
|
|
|
|
|
|
|
|
|
|
|
I want to thank you for your quick response in getting the part I ordered to me. I received it on Friday 11/05
and installed it the next day. It works just fine and when my wife is happy everyone in this house is happy.
Thanks again,
Loren P.
Installation successfully completed. Thanks for your support and the nice merchandise. We like the new racks better than the originals. Your prices are also more
reasonable than the competition, for essentially the same products. Happy to provide an endorsement, if you use them.
Dave
|
enter your Model number or Part number
and then click on "Search" button
|
Appliance Repair /
Error Codes, Fault Codes
|
|
WHIRLPOOL - Polara
|
Error Code
|
Condition
|
Check/Repair
|
|
F1 F0
|
EEPROM communication error
|
Recommended to replace control
|
|
F1 E1
|
EEPROM checksum error
|
Recommended to replace control
|
|
F1 E2
|
UL A/D errors
|
Recommended to replace control
|
|
F1 E4
|
Model ID error
|
Reinsert key tail. If that doesn’t work, recommended to replace control.
|
|
F1 E6
|
Latch signal mismatch error
|
Recommended to replace control
|
|
F2 E0
|
Shorted key error
|
Recommended to replace keypad assembly
|
|
F2 E1
|
Unplugged key-tail
|
Reinsert key-tail
|
|
F3 E0
|
Open top oven sensor
|
Inspect for open circuit. Sensor resistance should be 1K to 1.1K @ room temperature.
If that is not it, recommended to replace the sensor
|
|
F3 E1
|
Shorted top oven
|
Inspect for shorted sensor circuit, otherwise recommended to replace sensor
|
|
F3 E2
|
Bake range over temperature
|
At room temperature, sensor resistance should be 1K to 1.1K. If that is not it,
recommended to replace the sensor. If the sensor checks okay, recommended to replace
the control
|
|
F3 E3
|
Clean range over temperature
|
At room temperature, sensor resistance should be 1K to 1.1K. If that is not it,
recommended to replace the sensor. If the sensor tests okay, recommended to replace
the control
|
|
F3 E4
|
Bottom oven sensor open
|
Inspect for open circuit. Sensor resistance should be 1K to 1.1K at room temperature.
If that is not it, recommended to replace the sensor
|
|
F3 E5
|
Bottom oven sensor shorted
|
Inspect for shorted sensor circuit, otherwise recommended to replace sensor
|
|
F5 E0
|
Door switches do not agree
|
Inspect door switch. Contacts should be closed when plunger is actuated. Check door
switch circuit for open.
|
|
F5 E1
|
Door latch not operating
|
Inspect that door switch is completely closed. Test latch, solenoid, and actuation
switch for electrical or mechanical break downs
|
|
F8 E0
|
Refrigeration not operating properly
|
Inspect for open circuit between control and refrigeration cooling module
|
|
PF
|
Power failure
|
Do not replace control
|
Search for Whirlpool Appliance Parts
WHIRLPOOL - Range/Stove/Oven Fault Codes Non Y-Line
|
Error Code
|
Condition
|
Check/Repair
|
|
4 Digit Failure Code
|
|
F0 - E0
|
Failure in the Analog to Digital
|
Disconnect for 30 seconds, if the code re-appears, recommended to replace control
|
|
F1 - E1
|
Safety flip flop
|
Recommended to replace Electronic Range Control/Clock
|
|
F2 - E0
|
Keypad shortage
|
Recommended to replace Electronic Range Control/Clock
|
|
F3 - E0
|
Oven temperature sensor or oven temperature sensor fuse opened
|
Recommended to replace oven temperature sensor or fuse
|
|
F3 - E1
|
Oven temperature sensor shorted
|
Recommended to replace oven temperature sensor
|
|
F3 - E2
|
Oven overheating
|
Recommended to replace oven temperature sensor
|
|
F3 - E3
|
Clean temperature is too hot
|
Recommended to replace oven temperature sensor
|
|
F5 - E0 F5 - E1 and E2
|
Check door/latch switch
|
Recommended to replace component
|
|
2 Digit Failure Code
|
|
F0 or F1 or F5
|
Transistor failure
|
Recommended to replace Electronic Range Control/Clock
|
|
F2 - E0
|
Oven temperature is too high
|
1. Check operation of door lock on self-clean models
2. Check relay contact operation
3. High resistance in oven temperature sensor
|
|
F3
|
Oven temperature sensor is open or thermal fuse
|
Recommended to replace oven temperature sensor or thermal fuse
|
|
F4
|
Oven temperature sensor shortage
|
Recommended to replace oven temperature sensor
|
|
F6
|
Problem in time keeping circuit
|
1. Reset time and/or cooking operation
2. Test for proper ground
|
|
F7
|
Stuck function switch or button on Electronic Range Control
|
Recommended to replace Electronic Range Control/Clock
|
|
F8
|
Electronic Range Control failure
|
Recommended to replace Electronic Range Control/Clock
|
|
F9
|
Door lock circuit
|
Inspect wiring and test operation of door lock switch
|
Search for Whirlpool Appliance Parts
WHIRLPOOL - Range/Stove Oven Fault Codes, Common
|
Error Code
|
Condition
|
Check/Repair
|
|
2 Digit Failure Code
|
|
F1
|
Analog to Digital Failure
|
Disconnect for 30 seconds - if display reappears - replace control board
|
|
F1
|
Safety flip flop
|
Recommended to replace board
|
|
F1
|
Shorted keypad
|
Recommended to replace keypad
|
|
F3
|
Open oven temperature sensor
|
Recommended to replace oven temperature sensor
|
|
F2
|
Shorted oven temperature sensor
|
Recommended to replace oven temperature sensor
|
|
F3
|
Oven overheating
|
Recommended to replace oven temperature sensor
|
|
F3
|
Clean temperature is too hot
|
Recommended to replace oven temperature sensor
|
|
F5
|
Check door-latch switch
|
Recommended to replace switch if defective
|
|
4 Digit Failure Code
|
|
F1 - E1
|
Safety flip flop
|
Recommended to replace board
|
|
F2 - E0
|
Shorted keypad
|
Recommended to replace keypad
|
|
F3 - E0
|
Open oven temperature sensor
|
Recommended to replace oven temperature sensor
|
|
F3 - E1
|
Shorted oven temperature sensor
|
Recommended to replace oven temperature sensor
|
|
F3 - E2
|
Oven too hot
|
Recommended to replace oven temperature sensor
|
|
F3 - E3
|
Clean temperature is too hot
|
Recommended to replace oven temperature sensor
|
|
F5 - E0 F5 - E1 and E2
|
Check door-latch switch
|
Recommended to replace switch if defective
|
Search for Whirlpool Appliance Parts
WHIRLPOOL - Range/Stove Oven 30" Free-standing, Models SF3…& 24" Built-In
|
Error Code
|
Condition
|
Check/Repair
|
|
F2
|
Oven temperature above specifications
|
8-pin connector oven temperature sensor to the Electronic Range Control
|
|
F3
|
Open oven temperature sensor
|
Inspect wiring harness, recommended to replace oven temperature sensor if needed
|
|
F4
|
Shorted oven temperature sensor
|
Inspect wiring harness, recommended to replace oven temperature sensor if needed
|
|
F5
|
Pushbutton jammed
|
Inspect for binding of pushbuttons and control panel glass. If everything is good,
recommended to replace touch panel
|
|
F6
|
Computer logic interrupted
|
Recommended to replace Electronic Range Control
|
|
F7
|
Computer logic interrupted
|
Recommended to replace Electronic Range Control
|
|
F8
|
Computer logic interrupted
|
Recommended to replace Electronic Range Control
|
Search for Whirlpool Appliance Parts
|
|
Lowest Price
|