NOTE: Not valid for Y line. If there is a Y near the end of your model number, do
not use this chart.
|
Failure Code
|
Condition
|
Check/Repair
|
|
4 Digit Failure Code
|
|
F0 - E0
|
Failure in the analog to Digital
|
Disconnect for 30 seconds - if display re-appears - recommended to replace control
|
|
F1 - E1
|
Safety flip flop
|
Recommended to replace Electronic Range Control/Clock
|
|
F2 - E0
|
Keypad shortened
|
Recommended to replace Electronic Range Control/Clock
|
|
F3 - E0
|
Oven temperature sensor or oven temperature sensor fuse opened
|
Recommended to replace oven temperature sensor or fuse
|
|
F3 - E1
|
Shortage in the oven temperature sensor
|
Recommended to replace oven temperature sensor
|
|
F3 - E2
|
Oven overheating
|
Recommended to replace oven temperature sensor
|
|
F3 - E3
|
Clean temp too hot
|
Recommended to replace oven temperature sensor
|
|
F5 - E0 F5 - E1 and E2
|
Inspect door/latch switch
|
Recommended to replace component
|
|
2 Digit Failure Code
|
|
F0 or F1 or F5
|
Transistor failure
|
Recommended to replace Electronic Range Control/Clock(ERC)
|
|
F2 - E0
|
Oven’s temperature is overheating
|
1. Check operation of door lock on self-clean models
2. Check relay contact operation
3. High resistance in oven temperature sensor
|
|
F3
|
Oven temperature sensor is open or thermal fuse
|
Recommended to replace oven temperature sensor or thermal fuse
|
|
F4
|
Oven temperature sensor shortage
|
Recommended to replace oven temperature sensor
|
|
F6
|
Problem in time keeping circuit
|
1. Reset time and/or cooking operation
2. Inspect for proper ground
|
|
F7
|
Function switch is jammed or button on Electronic Range Control
|
Recommended to replace Electronic Range Control/Clock
|
|
F8
|
Electronic Range Control failure
|
Recommended to replace Electronic Range Control/Clock
|
|
F9
|
Door lock circuit
|
Inspect wiring and test operation of door lock switch
|