|
|
|
|
|
|
I want to thank you for your quick response in getting the part I ordered to me. I received it on Friday 11/05 and installed it the next day. It works just fine and when my wife is happy everyone in this house is happy.
Thanks again,
Loren P
Installation successfully completed. Thanks for your support and the nice merchandise. We like the new racks better than the originals. Your prices are also more reasonable than the competition, for essentially the same products.
Happy to provide an endorsement, if you use them.
Dave
|
enter your Model number or Part number
and then click on "Search" button
| Appliance Repair / Error Codes, Fault Codes |
|
JENN AIR - Range/Stove/Oven Fault Codes
| Failure Code |
Condition |
Check/Repair |
| F1 |
The touch pad or membrane is defective |
Recommended to replace touch pad or membrane, most likely the touch pad |
| F1 |
Watchdog on board |
Recommended to replace touch pad or clock assembly |
| F2 |
Oven overheating |
Replace relay board (if present) or oven temperature sensor |
| F3 or F4 |
Oven temperature sensor is open or shortened |
Recommended to replace oven temperature sensor |
| F5 |
Hardware and watchdog circuits are disagree |
Recommended to replace clock assembly |
| F6 |
AC signal is missing |
Inspected for proper voltage |
| F7 |
Shortage of the function key or the button is jammed |
Recommended to replace touch pad or clock assembly or attempt to un-jam the button |
| F8 |
Analog/Digital supervisory |
Recommended to replace clock assembly |
| F9 |
Door latch supervisory |
Inspect door lock circuit or recommended to replace clock assembly |
| F0 |
Function key jammed |
Recommended to replace touch pad or clock assembly |
Search for Jenn Air Appliance Parts
JENN AIR - 'Newer Style' Range/Stove/Oven Fault Codes
| Failure Code |
Condition |
Check/Repair |
| F1 |
Power to element relay energized during time of day display |
Shortage in the wiring harness or recommended to replace the power relay board
*For double ovens, recommended to replace the second oven board |
| F2 |
Oven temperature sensed; over 600F sensed by control in time of day mode, bake mode, or over 900F sensed in clean mode. |
Ohm test the oven temperature sensor, if in good working condition, recommended to replace the power relay board. |
| F3 |
Cooling fan is on without any oven function selected |
Inspect oven temperature sensor or wire harness to oven temperature sensor |
| F4 |
Oven temperature sensor shortening |
Inspect oven temperature sensor or wire harness to oven temperature sensor |
| F5 |
Power to element relays disabled in cook mode |
1. Intermittent oven temperature sensor or wire harness or
2. Intermittent contact on power relay board |
| F7 |
Shortening in the key sensed for 32 seconds |
1. Shortning in the membrane or
2. Defective display board |
| F8 |
Meat probe alarm shortened |
1. Probe jack or harness to probe jack, or,
2. Probe sensing temp above 250F |
| F9 |
Door lock safety circuit on the power relay board sensed |
Recommended to replace power relay board |
| FF |
Invalid temperature reading on power relay board |
Inspect oven temperature sensor and wire harness, or recommended to replace power relay board |
| F |
Communication error among boards |
Wiring harness, inspect harness wires for continuity, or recommended to replace power relay board |
| FC |
Communication error among boards |
Wiring harness or power relay board |
| FR |
Second oven error sensed |
1. Inspect oven temperature sensor and harness, or,
2. Recommended to replace second board |
Search for Jenn Air Appliance Parts
JENN AIR - Range/Stove/Oven Error / Fault Codes - Version 2
| Error Code |
Condition |
Check/Repair |
| F0 |
Function key jammed |
Recommended to replace touch or the clock if the touch pad is part of the clock |
| F1 |
Touch Pad/Clock is defective |
Recommended to replace touch pad/clock. |
| F2 |
Oven temperature is too hot |
Recommended to replace relay board / oven temperature sensor. Inspect sensor harness |
| F3 OR F4 |
Oven temperature sensor is shorted or open |
Inspect sensor harness and the harness connection between oven sensor and oven control. If the wiring okay recommended to replace oven temperature sensor |
| F5 |
Hardware conflict and watchdog |
Recommended to replace clock |
| F7 |
Function key is jammed or shorted |
Recommended to replace touch pad/clock |
| F8 |
Analog/Digital problem |
Recommended to replace clock |
| F9 |
Door latch |
Inspect door latch components |
Search for Jenn Air Appliance Parts
|
|
Lowest Price
|
|
|
|